Anti-Interference Wireless Tour Guide Audio System
video

Anti-Interference Wireless Tour Guide Audio System

Frequency: 2.4GHz
Channels: 999 (CH:001–CH:999)
Range: 300m
Battery Life: 20H (transmitter)
Charging: USB-C, 0.8A
Send Inquiry
Product Introduction

Hefei Humantek Co., Ltd. is one of the leading manufacturers and suppliers of anti-interference wireless tour guide audio system in China. With a professional production team, we are able to meet the needs of the majority of our customers. Welcome to buy bulk high quality anti-interference wireless tour guide audio system from our factory.

 

The B7-2 pairs a pocket transmitter with a lightweight ear-hook receiver, holding a clean signal across 999 channels even in crowded galleries, factory floors, and outdoor groups.

 

B7-2 tour guide system-2

Products Features

 

Museum floors, factory tours, and open-air routes all share the same problem: too many transmitters, too little clean bandwidth. The B7-2 addresses this at the channel level, not just at the volume knob.

999-Channel Frequency Range

Operating on 2.4GHz FHSS across CH:001–CH:999, adjacent tour groups can run side by side on separate channels without bleed-through.

One-Key and Manual Pairing

Guides can pair a full set of receivers to a transmitter in seconds, or set a fixed channel manually for multi-day tours and fixed installations.

300-Meter Transmission Range

A stable range of 50–300m keeps visitors connected across large exhibition halls, plant floors, and outdoor courtyards without repeaters.

All-Day Battery Life

The transmitter's 3000mAh cell runs up to 20 hours with Bluetooth off, covering a full day of back-to-back tours on one charge.

Bluetooth 5.2 Connectivity

Receivers pair over Bluetooth 5.2 for setup and calls, with a working distance of 100–250m independent of the tour channel.

Dual Charging Options

The transmitter charges from its dock or directly by USB-C at 0.8A, reaching a full charge in around four hours either way.

Multiple tour guide groups with B7-2 transmitters operating simultaneously in the same large hall without signal overlap

 

Transmitter Controls at a Glance

 

 

B7-2 transmitter-1

3.5mm microphone input accepts a plug-in dual mic for hands-free narration during longer walking routes.

One-key mute toggles instantly, with a long press restoring the mic after a brief pause.

Pairing and channel adjustment run through the same volume keys, switching modes with a single button combination.

LCD status display shows mute state, pairing status, channel number, battery level, and Bluetooth status in one view.

 

Specifications

 

The full B7-2 set: transmitter, ear-hook receiver, charging case, and USB-C cable - sized and rated as detailed below.

 

B7-2 Transmitter
Working Frequency 2.4GHz, 999 channels (CH:001–CH:999)
Charging Method Charging dock or USB-C cable, 0.8A, approx. 4 hours full charge
Operating Temperature -20°C to +70°C
Microphone Unidirectional
Transmission Range 50–300m (open area)
Standby Time 20 hours (Bluetooth off)
Dimensions 114.7mm (L) × 55.3mm (W) × 20.8mm (H)
Battery 3000mAh, 3.7V
B7-2 Receiver
Dimensions 50mm (L) × 50mm (W) × 14.5mm (H)
Weight Approx. 12g per earpiece; 85g per full set (two earpieces + charging case)
Bluetooth Bluetooth 5.2, device name "A16"
Call Distance 100–250m
Battery Life 7–20 hours (depending on volume level)
Battery Earpiece: 3.7V, 100mAh · Charging case: 3.7V, 300mAh
Charging Earpiece via case: approx. 2 hours · Case via USB-C: approx. 2 hours
Compatible Transmitters Single mic: B7-2 transmitter · Dual mic: B7-2 transmitter + secondary unit

 

Application scenarios

 

Factory floor tour with visitors wearing wireless receivers near industrial machinery
01

Factory and Plant Tours

Clear narration over ambient machine noise, with a range built for long production lines.

02

Museums and Galleries

Multiple docent groups moving through connected rooms without overlapping audio.

Museum tour guide speaking to visitor group wearing B7-2 receivers in a gallery
Outdoor heritage site walking tour with guide using transmitter and group wearing receivers
03

Outdoor and Heritage Sites

A 300m range keeps groups connected across courtyards, gardens, and open plazas.

04

Exhibition Halls and Trade Shows

Booth presenters and floor guides stay on separate channels across a busy show floor.

Trade show exhibition hall with presenter using transmitter and attendees wearing receiversTrade show exhibition hall with presenter using transmitter and attendees wearing receivers

 

FAQs

 

Q: How many groups can operate in the same building at once?

A: With 999 selectable channels, a single venue can run many simultaneous tours; the practical limit comes from spacing between groups rather than the channel count itself.

Q: Does the receiver need Bluetooth to function during a tour?

A: No. Tour audio runs on the 2.4GHz channel between transmitter and receiver; Bluetooth is used separately for calls and device setup.

Q: How long does a full set last on one charge?

A: The transmitter runs up to 20 hours with Bluetooth off, and receivers last 7–20 hours depending on volume, both charging fully in about 4 hours.

Q: Can guides switch between live narration and a plug-in microphone?

A: Yes. The 3.5mm input accepts a dual microphone for hands-free use alongside the transmitter's built-in mic.

 

 

Hot Tags: anti-interference wireless tour guide audio system, China anti-interference wireless tour guide audio system manufacturers, suppliers, factory, Anti interference Wireless tour guide system, Many to many Tour Guide System for Museums, Strong Signal Tour Guide System, tour guide equipment for scenic spots, Tour Guide System for Training, Wireless tour guide system for cruise ship sightseeing

Send Inquiry

whatsapp

Phone

E-mail

Inquiry